Calcuris

Garage Door Spring Replacement Cost (2026): Torsion, Extension & Emergency Pricing

Replacing a garage door spring typically costs $150 to $350 for a torsion spring or $100 to $200 for an extension spring, parts and labor included — most homeowners spend $150 to $400 overall, per a ConsumerAffairs survey of 18 companies. Replacing both springs as a matched pair, an after-hours call, or worn cables/bearing plates each add to that base. Use the estimator below to build your own range.

Pick your spring type, whether you're replacing one spring or the matched pair, when the work happens, and whether cables or bearing plates also need replacing. The result is an installed-cost range built from four published sources, not one company's marketing number.

$150 – $350

Estimated installed cost for your selections, before local quotes.

This range covers spring parts and standard installation labor for a typical residential garage door. It does NOT include: a full new garage door opener, track or panel repairs, commercial-grade springs ($300-$500+ per Quality Overhead Door), or a torsion-conversion kit if you're switching an extension-spring door to torsion ($400-$800). Homewyse's January 2026 unit-cost estimate ($319-$562 per spring) runs higher because it bundles disposal, job supplies and a 2-hour minimum labor charge — always get an itemized written quote, since the biggest single red flag in this category is an unexplained price several times any of these ranges.

Ranges compiled from the published sources listed at the bottom of this page (accessed July 2026). How we build and check our tools →

Average garage door spring repair cost, by spring type

According to Quality Overhead Door, torsion springs (mounted on a shaft above the door) typically cost $150 to $350 per spring, parts and labor included, while extension springs (which stretch along the tracks) run $100 to $200 per spring. ConsumerAffairs, which surveyed 18 garage door companies nationwide, found a similar overall picture: most homeowners pay $160 to $350 for a single-door job, rising to $175-$380 for a two-door home. Homewyse's January 2026 unit-cost calculator, which bundles materials, labor, job supplies and disposal for an in-stock 10,000-cycle torsion set, lands higher at roughly $319 to $562 per spring — a reminder that “per spring” pricing varies a lot depending on what's bundled in.

Torsion vs extension springs: durability, safety and price

Torsion springs are widely preferred by technicians: ConsumerAffairs quotes a Precision Door Service director noting torsion springs typically last 10,000-30,000 cycles versus 5,000-10,000 cycles for extension springs, and they're considered safer because the twisting force is contained rather than released outward if the spring fails. That extra durability is why torsion springs cost more upfront ($150-$350 vs $100-$200) but often work out cheaper per year of service. Switching an older extension-spring door over to torsion is possible with a conversion kit, priced by Quality Overhead Door and ConsumerAffairs alike at $400-$800 including labor.

Replacing one spring vs both — why pros recommend the pair

Garage doors with two springs wear both at roughly the same rate, so if one has failed, ConsumerAffairs' surveyed companies generally recommend replacing both together: it avoids uneven lift and a near-certain second service call when the other spring gives out weeks later. Quality Overhead Door prices a standard two-spring system at $200 to $400 for both, and ConsumerAffairs notes some companies charge as much as $400 to $500 to do both including the service-call fee — that upper figure is the ceiling this page uses for the "both springs" add-on.

Emergency and after-hours pricing

Both Quality Overhead Door and ConsumerAffairs independently cite the same surcharge for urgent work: an after-hours or same-day call typically adds $50 to $150 on top of the base repair price. If your door is stuck closed and it's not a safety emergency, waiting for the next business-hours slot is the simplest way to avoid that add-on.

Cables, bearing plates and other repairs found during the visit

Springs rarely fail in isolation — the lifting cables and end bearing plates run on the same duty cycle and are commonly frayed or seized by the time a spring breaks. Yelp's July 2026 cost guide puts cable replacement at $90-$210 and bearing replacement at $85-$250, including parts and labor. If your technician flags either during the inspection, expect the total to land above the springs-only estimate — ask for the cable/bearing line itemized separately from the spring price so you can tell what you're actually paying for.

Garage door spring cost near me: getting a price you can trust locally

Spring pricing is set by local labor rates, spring availability and how many technicians compete in your area — none of the national ranges above are a quote. The reliable way to find your real "near me" price: get at least two written, itemized quotes (spring type, number of springs, labor, any cable/bearing work broken out separately) before anyone touches the door, and confirm whether the quote already includes a service-call fee.

How much is too much? One instructive case: a homeowner posted to r/GarageDoorService in 2026 after their spouse signed a $1,800 work order for two springs, parts and labor included — several times every editorial ceiling above (ConsumerAffairs' own "as much as" figure for both springs tops out at $400-$500). That's not proof every high quote is a scam — heavier commercial-grade doors do run $300-$500+ per spring per Quality Overhead Door — but a bid that far outside these published ranges, with nothing unusual about the door to explain it, is a reason to get a second quote before signing, not a reason to assume the worst without checking.

Whatever you're financing alongside this repair — a full door replacement, an opener upgrade, or a wider garage project — the loan calculator can help you sanity-check monthly payments before you commit.

DIY vs professional, and when it's time for a whole new door

Every source reviewed for this page agrees on one point: spring replacement is not a DIY job. A wound torsion spring stores enough force to cause serious injury or worse if released incorrectly, and ConsumerAffairs notes an improperly installed spring can also damage the door's opener and other hardware. If the door is 15-20+ years old or has other significant wear beyond the spring, ConsumerAffairs' cited contractor recommends comparing the spring-repair cost above against a full replacement, which runs $500 to $2,000 for the whole door — sometimes the better long-term value if multiple systems are failing at once.

Frequently asked questions

How much does it cost to replace a garage door spring?

Most homeowners spend $150-$400 overall, per a ConsumerAffairs survey of 18 companies: torsion springs run $150-$350 per spring and extension springs $100-$200 per spring (parts and labor included), per Quality Overhead Door. Replacing both springs of a pair, after-hours service, or cables/bearing plates add to that base.

How much does garage door spring replacement cost near me?

National ranges are a starting point, not a quote — local labor rates and spring availability set the real price. Get at least two itemized written quotes (spring type, one vs both springs, any cable/bearing work) before work starts, and confirm whether a service-call fee is already included.

Should I replace both garage door springs or just the broken one?

Most technicians recommend replacing both, since they wear at roughly the same rate — ConsumerAffairs' surveyed companies warn that replacing only one often means a second failure and a second service call soon after. Quality Overhead Door prices a standard two-spring job at $200-$400 total.

How much does emergency garage door spring repair cost?

Same-day or after-hours emergency calls typically add $50-$150 on top of the base repair price, according to both Quality Overhead Door and ConsumerAffairs.

Torsion vs extension springs — which is better?

Torsion springs cost more upfront ($150-$350 vs $100-$200 per spring) but last longer — 10,000-30,000 cycles versus 5,000-10,000 for extension springs, per ConsumerAffairs — and are generally considered safer since the force stays contained rather than releasing outward if the spring fails.

How much does it cost to convert extension springs to torsion springs?

A torsion conversion kit, including labor, costs $400-$800, per both Quality Overhead Door and ConsumerAffairs.

How much does it cost to replace garage door cables or bearing plates?

Per Yelp's July 2026 cost guide, cable replacement runs $90-$210 and bearing plate replacement $85-$250, including parts and labor. These often get flagged alongside a spring replacement since they wear on a similar cycle.

Can I replace a garage door spring myself to save money?

It's strongly discouraged. A wound spring stores enough force to cause serious injury, and an improper install can also damage the opener and other hardware — the labor cost buys the training and tools to do it safely, not just the swap itself.

How do I know if a garage door spring quote is too high?

Compare it against the published ranges above and ask for an itemized breakdown (spring type, quantity, labor, any cable/bearing work). A quote several times higher than every editorial source's ceiling, with nothing unusual about your door's size or commercial rating to explain it, is a reason to get a second opinion before signing.

Is it cheaper to replace the spring or the whole garage door?

Spring replacement ($150-$400 typically) is far cheaper than a full door replacement ($500-$2,000, per ConsumerAffairs). Whole-door replacement only becomes the better value if the door itself is old, damaged, or missing modern safety features beyond just the spring.

Sources

Related tools

Researched & verified by the Calcuris Data & Research Team. How we build and check our tools →